Baumatic Pythagora P760SS, User Manual

Page: 11 / 36

11
Setting and using the oven programmer/timer
Setting the time of day and selecting manual operation mode
After your appliance is connected to your mains supply for the
first time, the numbers on the timer display will flash 00.00.
Before you can select a cooking function or set a temperature,
you must put the appliance into “manual operation” mode and
set the time of day.
o
To select manual operation mode, press the duration and
cooking end time buttons simultaneously.
o
Use the plus and minus buttons to adjust the time that appears
in the timer display.
o
When the time shown in the timer display is correct, release the
plus and minus buttons. After 5 seconds, The “Auto” function
symbol
(11) will disappear from the timer display and the
“manual operation” symbol (13) will appear instead.
Before first use
o
To remove any residue from the oven that may have been left
from the manufacturing process, you should select either the fan
or conventional oven function and turn the thermostat dial to its
maximum temperature setting. For the secondary oven you
should select the conventional oven function and select its
maximum temperature setting.
o
It is perfectly normal for a smell to be produced during this
process.
o
You should make sure that any windows in the room are left
open during this process.
o
It is advisable for you not to remain in the room whilst the
burning off process is taking place.
o
You should leave each oven on maximum setting for 30 – 40
minutes.
o
IMPORTANT: You should not burn off both ovens
simultaneously.