Baumatic POG4201SS, Instruction Manual, Page: 16 / 40

o
We would recommend that an appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
appliance.
Switching the gas oven on
The oven has automatic ignition, to light it you should do the
following:-
o
Open the door of the appliance.
o
Push the oven function and temperature control knob down
slightly and then turn it anticlockwise to the word MAX.
o
Whilst it is pointed to the MAX position, fully push down this
knob and hold it down.
o
The gas oven should light within 15 seconds.
o
Once the burner has lit, continue to keep the oven function and
temperature control knob held down for a further 10 seconds.
Otherwise the safety cut off will operate and block the flow of
gas.
o
IMPORTANT: When you are certain that the oven burner is fully
lit, close the oven door. Then turn the oven function and
temperature control knob clockwise until it reaches the
temperature that you desire.
o
DO NOT turn the control knob past the MIN position, otherwise
the burner may go out.
o
If the gas oven does not light within 15 seconds, then release
the oven function and temperature control knob.
o
IMPORTANT: YOU MUST TURN THE CONTROL KNOB BACK
TO ITS ORIGINAL POSITION; OTHERWISE GAS WILL
CONTINUE TO BE RELEASED.
o
Wait for 1 minute, before repeating the ignition procedure again.
When lighting your oven for the first time, it may take
several times until the electric ignition operates. This is
due to air being in the gas pipe.
10