Turning the hob on
o
Press the ON/OFF button
(1)
o
The cooking zone indicators
(6)
will all read “0”.
o
The decimal point symbols
(7)
will flash on and off.
Turning on a zone and setting a power level
IMPORTANT:
A zone must be selected within 10 seconds of turning
the hob on.
o
Press the plus
(4)
button for the zone that you
want to use.
o
Adjust the zone between power levels 1 and 9,
using the plus
(4)
and minus
(5)
buttons. By
holding down either of these buttons, the value
on the zone indicator
(6)
will adjust up or down
every 0.3 seconds.
o
If when holding down the plus
(4)
or minus
(5)
buttons the
power level reaches zero. You will need to press either the plus
(4)
or minus
(5)
button again, to continue adjusting the power
level.
Turning off a zone gradually
o
Press the minus button
(5)
until the number in
the cooking zone indicator
(6)
reaches “0”. After
3 seconds, the zone will switch off automatically.
o
An “H” will show in the cooking zone indicator
(6)
until the
temperature of the zone falls below 60°C (see the section on the
“residual heat indicator” for further information).
13
Summary of Contents for PHC620SS
Page 1: ...PHC620SS 60 cm PHC720SS 77 cm Front touch control ceramic hob ...
Page 10: ...Ceramic hob surface layout PHC620SS PHC720SS 10 ...
Page 31: ......
Page 32: ...2 ...
