Baumatic PCG9110SS Instruction Manual Download Page 17

 

16

Cooking guidelines 

 

o

 

Please refer to the information given on food packaging for 
guidance on cooking temperatures and times. Once familiar with 
the performance of your appliance, temperatures and times can 
be varied to suit personal preference. 

 

o

 

Preheat the oven for at least 15 minutes before placing food into 
the cavity. 

 

o

 

Make sure that frozen foods are thoroughly thawed before 
cooking, unless the instructions on the food packaging advise 
that you can “cook from frozen”. 

 

o

 

Before cooking, check that any unused accessories are removed 
from the oven. 

 

o

 

Place cooking trays in the centre of the oven and leave gaps 
between the trays to allow air to circulate. 

 

o

 

Try to open the door as little as possible to view the dishes. 

 

Warnings 
 

o

 

Keep the oven door open when using the grill function and make 
sure that the grill deflector is fitted.

 

 

o

 

Do not use aluminium foil to cover the grill pan or heat items 
wrapped in aluminium foil under the grill. The high reflectivity of 
the foil could potentially damage the grill element.

 

 

o

 

You should also never line the base of your oven with aluminium 
foil. 

 

o

 

During cooking, never place pans or cookware directly onto the 
bottom of your oven. They should always be placed on the shelf 
provided.  

 

o

 

The grill becomes extremely hot during operation, avoid touching 
it inadvertently when handling the food which you are grilling.

 

 

o

 

Important: 

Be careful when opening the door, to avoid contact 

with hot parts and steam. 

 
 
 
 
 
 

Summary of Contents for PCG9110SS









































Reviews: