Baumatic P670SS, Instruction Manual, Page: 27 / 36

Removing the oven door for cleaning
o
Fully open the oven door.
o
Locate the oven door hinges (see
drawing above).
o
Tip back the brackets (A) on both
of the hinges.
o
You should grip the sides of the door at
the centre and then incline it slightly
towards the oven cavity. By pulling the
lower part of the oven door away from
the oven, the hinges will disengage from
the holes that they are located in.
o
IMPORTANT: You should make sure that the door is supported
at all times and that you place the door on some padded
material whilst cleaning it.
o
The oven door and door glass should only be cleaned using a
damp cloth and a small amount of detergent. The cloth
MUST
NOT have come into contact with any form of cleaning product
or chemical previously.
o
To refit the door you should slide the hinges
back into their slots and open the door fully.
o
IMPORTANT: The brackets (A) must be
closed back into their original positions before
closing the door.
27