Instructions for use
16
Failure
Detergent residues in
the dispenser.
Softener is not
completely rinsed, or
water is left in the
dispenser dish.
Washing time is longer
than the display indicated
at the beginning of the
program; during the
operation the washing
time had jumped back to
the preceding position.
Possible cause
Low water flow
pressure.
Some detergents may
stick to the dispenser
rather hard if it is wet.
Syphon cover is not
correctly positioned or
is clogged.
The machine switched on the
UKS system because of
uneven laundry load.
Because of excessive
foaming during the rinse
cycle, the machine adds extra
water and repeats draining.
Remedy
• Clean the inlet pipe
filter net.
• In case of low water
pressure increase
water level.
• Wipe the dispenser
prior loading
detergent.
Clean the dispenser
and firmly fix the cover
to its place.
Washing program time
may be prolonged for
10 minutes and the
machine still functions
perfectly.
In case you were not successful in repairing the malfunctions in spite of the
above suggestion chart, call the nearest authorized service shop.
Repairing the failure arising from inappropriate connections or use of the
appliance is not covered by the guarantee, and the repair expenses are paid
by the customer.