IMPORTANT: From this step onwards, the hood must be
fully supported from underneath UNTIL step 9 has been
completed and the cooker hood is fully secured to the
framework.
8)
Lift the cooker hood fully upwards to the inside of the securing
plate and then slide it over. Feed the electrical cable through the
circular hole on the securing plate, so it can be connected to your
mains supply after the rest of the installation process has been
completed.
8a)
The clips on top of the
framework should hook over
the cut outs in the securing
plate, as shown in the
diagram opposite.
25
Summary of Contents for ISL4SS
Page 1: ...ISL4SS 40 cm Island hood ...
Page 32: ...32 32 ...