background image

 

Each time a button is pressed, a beep will sound to acknowledge the command. 

S

ETTING 

C

LOCK 

T

IME

 

This is a 12 and 24 hour clock.   

To check the time while the oven is operating, 

press CLOCK/PRESET. 

Suppose you want to set the oven clock time 

at 8:30. 

1. 

In standby mode, press 

CLOCK/PRESET once or twice to 

choose 12 or 24 hour clock. 

2. 

Turn MENU/TIME to set 8 o’clock. 

3. 

Press CLOCK/PRESET button. 

4. 

Turn MENU/TIME to set 30 min. 

5. 

Press CLOCK/PRESET to confirm the 

setting. 

M

ICROWAVE 

C

OOKING

 

The longest cooking time is 95 minutes. 

You can select microwave power by pressing 

the POWER LEVEL button. 

Press 

POWER LEVEL

Cooking Power 

once 100% 

 

twice 80% 

 

3 times 

60%   

4 times 

40%   

5 times 

20%   

6 times 

0%   

For example, suppose you want to cook for 

10 minutes at 60% of microwave power. 

1. 

In standby mode, press POWER LEVEL 

repeatedly (3 times) to select cooking 

power. 

2. 

Turn MENU/TIME in clockwise direction   

 

 

to enter 10:00. 

3. 

Press START/QUICK START. 

Note: 

You can check the cooking power 

during cooking by pressing POWER LEVEL. 

W

EIGHT 

D

EFROST 

 

The oven can be used to defrost food based 

on the weight you entered. The defrosting 

time and power level are automatically set 

once the food category and the weight are 

programmed. The frozen food weight ranges 

from 100g to 1800g. 

Suppose you want to defrost 600g of meat. 

1. 

In standby mode, press WEIGHT 

DEFROST button once. 

2. 

Press WEIGHT ADJUST repeatedly to 

enter food weight. 

3. 

Press START/QUICK START. 

Note:

 During defrosting process, the system 

will sound and pause to remind you to check 

the food and turn over the food.   

Press the button START/QUICK START to 

enter into the next defrosting stage. 

 

 

 

 

 

 

 

H

H

O

O

W

W

 

 

T

T

O

O

 

 

S

S

E

E

T

T

 

 

T

T

H

H

E

E

 

 

O

O

V

V

E

E

N

N

 

 

C

C

O

O

N

N

T

T

R

R

O

O

L

L

S

S

 

 

Summary of Contents for GMGI250SS





















Reviews: