17
6)
Take the fixing bracket ‘G’ (Fig. 4 – previous page), centre it
with respect to the mark you previously made, keeping it in
contact with the ceiling, and then mark the anchoring holes
(‘H’).
7)
Using a drill bit with a 6mm diameter, make two holes on the
fixing marks you previously made (see below).
8)
Insert the expansion fixings (rawlplugs) provided, put bracket
‘G’ (see Fig. 4 on previous page) in position and secure it with the
screws provided.
9)
Lift casing ‘B’ up to the ceiling and secure it to the bracket ‘G’,
inserting the screws provided in the holes ‘M’ (Fig. 4 – previous
page).
INSTALLATION INSTRUCTIONS
– Fitting the Chimney
Summary of Contents for F70SS
Page 1: ...F70SS Cooker Hood...
Page 24: ...23...