17
6)
Take the fixing bracket ‘G’ (Fig. 4 – previous page), centre it
ou previously made, keeping it in
, and then mark the anchoring holes
mm diameter, make two holes on the
s you previously made (see below).
INSTALLATION INSTRUCTIONS
– Fitting the Chimney
with respect to the mark y
contact with the ceiling
(‘H’).
7)
Using a drill bit with a 6
fixing mark
8)
Insert the expansion fixings (rawlplugs) provided, put bracket
‘G’ (see Fig. 4 on previous page) in position and secure it with the
screws provided.
9)
Lift casing ‘B’ up to the ceiling and secure it to the bracket ‘G’,
inserting the screws provided in the holes ‘M’ (Fig. 4 – previous
page).
