11
Your Baumatic Cooker Hood uses CARBON FILTERS to purify the air for the
air recirculation function.
You will find that one filter will attach over the front of the fan motor (please
see figure at bottom of page).
The active carbon filter must be replaced regularly, at least once every four
months, to allow normal operation.
Before starting to fit the carbon filter, turn the
omni-polar switch OFF!
Changing the Carbon Filters – Note: carbon filters cannot be cleaned!
1)
Remove the metal grease filter
grille (see page 9).
2)
Take carbon filter and extract
centre peg on it about 10mm.
(If changing, remove the old
carbon filter by rotating it until
it unlatches from the sides of the
motor).
3)
Place the new carbon
filter over the motor
bracket, making sure that
the centre button fits
exactly into the hole on the
bracket. Press lightly until
it snaps into place then
insert the centre peg.
4)
Replace the anti-
grease filter grille.
NOTE
If your filter is different
(i.e. is the Bayonet
Circular-insert type,
Position the filter P in
order to cover the motor
protection grille, ensuring
that the ‘X’ on the filter
lines up with the ‘Y’ on the
conveyor. Then turn
clockwise. Reverse to
dismount
Installing / Changing the Carbon Filter
