1)
Remove the metal grease filters.
2)
Create an opening in the underneath of the kitchen unit; the cut-
out must be of the dimensions shown in the drawing above.
IMPORTANT:
If you are going to connect your cooker hood to
external ducting, then you must complete the steps listed in the
“Connecting to external ducting” section before carrying on with the
rest of the installation (this information can be found on page 22).
3)
Make a hole in the inside of the kitchen unit for the electrical cable
to feed through.
4)
Lift the cooker hood towards the cut-out that you made in step 2.
Feed the electrical cable through the hole that you made in step 3.
IMPORTANT:
Do not connect the electrical cable to the mains supply
at this stage.
20