34
o
The moulded plug that is supplied with the appliance must be
placed into an earthed and insulated socket.
o
Broken or damaged power leads must only be replaced by a
suitably qualified person. A power lead of a similar type must be
used in replacement.
o
IMPORTANT: We do not recommend that this appliance is
connected to an extension lead.
Before first use maintenance wash
o
When your washing machine has been correctly installed, we
recommend that you perform a maintenance wash cycle, without
any clothing being placed inside of the drum.
o
This will check that all aspects of the installation are correct; it will
also remove any deposits that may have been left on the drum by
the manufacturing process.
o
Select the NORMAL program (see the “Setting a wash program”
section).
Error code failure system
If your appliance senses that it is not operating correctly, then an error
code may appear on the LED display.
The following error codes can possibly be remedied by the customer
and the steps outlined below should be followed.
BEFORE COMPLETING ANY MAINTAINEANCE ON THE
APPLIANCE, IT SHOULD BE DISCONNECTED FROM YOUR
POWER SUPPLY.
Error
code
Problem Reason
Solution
E1 Water
not
draining.
o
Drainage pipe is kinked or
blocked so the water cannot
be drained.
o
The drain pipe is located
above 90 cm from the
ground.
o
Open the lid after
the drum has
stopped spinning
and check the
drainage pipe.
E3 Excessive
noise
during spin.
o
The laundry is not
distributed evenly in the
drum, so the load is colliding
with the drum wall creating
noise.
o
The machine will
try to correct the
load twice before
omitting a warning.
o
Open the lid and
redistribute the
load when the
drum stops
moving.
Summary of Contents for BWM5001
