Baumatic BWE41BL, Instruction Manual

Page: 20 / 24

Moisture is forming on the inside of the
appliance.
The door is slightly open.
The door is being kept open too long or is
being opened too frequently. Open the
door less often.
The door is not sealed properly.
Moisture is forming on the outside of the
appliance.
The door is slightly open, causing cold air
from inside the appliance to meet warm,
moist air from the outside.
Abnormal display on the control panel. LL on the temperature LED display
indicates that the temperature of the
appliance is too low. You should use the
temperature increase button (A) to
adjust the temperature.
HH on the temperature LED display
indicates that the temperature of the
appliance is set too high. You should use
the temperature decrease button (B) to
adjust the temperature.
F1 indicates that the thermostat is
faulty. You should contact the Baumatic
Service Department to arrange an
engineer visit.
IMPORTANT: If your appliance appears not to be
operating correctly, then you should disconnect it
from your mains supply and then contact the
Baumatic Service Department on telephone
number (0118) 933 6911.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE
YOURSELF.
Please note that if an engineer is asked to attend whilst the product is
under guarantee and finds that the problem is not the result of an
appliance fault, then you may be liable for the cost of the call out
charge.
The appliance must be accessible for the engineer to perform
any necessary repair. If your appliance is installed in such a
way that an engineer is concerned that damage will be caused
to the appliance or your kitchen, then he will not complete a
repair.
This includes situations where appliances have been tiled in,
sealed in with sealant, have wooden obstructions placed in
front of the appliance, like plinths. Or any installation other
than the one specified by Baumatic Ltd. has been completed.
Please refer to the conditions of guarantee that appear on the
warranty card that you receive with the appliance.
20