Adjusting the height and levelling off your wine cabinet
o
The appliance is equipped with adjustable feet, so that the
height may be adjusted to level the cabinet on uneven floor
surfaces.
o
We recommend that two people carry out this procedure.
o
The height must be adjusted prior to building the appliance into
the housing unit and it should be set at such a height that the
top panel of the appliance fits exactly below the kitchen worktop.
o
Tilt the appliance approximately
60° to allow access to the
adjustable feet.
o
Take care to ensure the cabinet is
supported at all times.
o
Twist the foot into a suitable
position to level the cabinet.
o
Repeat these steps for the other
adjustable feet.
IMPORTANT: If the appliance is not level, then the door and
door seal may be affected.
IMPORTANT: Do not move the appliance when the feet are
adjusted high.
22
