background image

Important safety information 

 

Your  safety  is  of  the  utmost  importance  to  Baumatic. 
Please make sure that you read this instruction booklet 
before attempting to install or use the appliance. If 
you are unsure of any of the information contained in 
this booklet, please contact the Retailer where you 
purchased your appliance 

 
IMPORTANT: Any installation work must be 
carried out by a qualified electrician or 
competent person.
 
 
 

Use of the appliance 
 

o

 

Your appliance is only designed to be used in the 
home. It is suitable for storing and chilling wine. 
NO food stuffs must be stored in the appliance. If it 
is used for any other purpose or it is not used 
correctly, then Baumatic Ltd. will accept no liability 
for any damage that is caused. 

 

o

 

Altering the specification of the appliance must not be attempted 
for reasons of safety. 

 
Before using your appliance 
 

o

 

Check the appliance for any signs of transport damage. If you 
notice any damage, then you should not connect your appliance 
to your mains supply and should contact your retailer. 

 
Refrigerant 
 

o

 

Your appliance contains R600a refrigerant, which is a natural gas 
that does not contain CFCs that can damage the environment. 
However it is a flammable substance, therefore care should be 
taken: 

 

During the transportation and installation of the 
appliance, make sure that the refrigeration pipework 
does not get damaged. 

 

If it does become damaged then sources of ignition 
and open flames should be avoided. Also the room 
that the appliance is situated in should be thoroughly 
ventilated. 

 

o

 

Do not place any objects on top of the appliance, 
as this may damage the table top. 

 

5

 

Summary of Contents for BWC614SS-ANZ





























Reviews: