Baumatic BW28, User Manual

Page: 8 / 24

Your Baumatic BW28 Wine Cooler
7
Using your
Wine
Cooler :
1) Connecting
™
First, connect the
power.
™
Find a suitable power
outlet and make sure
that your voltage is
the same as what is
shown on your Wine
Cooler’s rating label.
2) Power
™
When you connect the
power, your Wine
Cooler will start
working.
™ To turn the interior
light on, press the
switch on the top
right hand corner just
inside your Wine
Cooler’s door.
3) Adjusting the Temperature.
™ You can adjust the
interior temperature
of your Wine Cooler by
using the temperature
adjustor on the upper
side of the inside
cabinet. ‘High’
increases the
temperature; ‘Low’
reduces it.
™
Interior temperature
adjustment ranges
from 10-18
°C
(50 –
64.4
°F
), although
colder temperatures
can be achieved on
the lower shelves
(about 8
°C)
. When the
interior temperature
reaches the pre-set
temperature, it will be
kept at that. There is
no thermostat as the
semiconductor system
maintains itself. The
extractor fan
withdraws air and re-
circulates it through
the main fan below it.
4) Cooling Speed.
™
The interior
temperature of your
Wine Cooler can reach
15
°C
(59
°F
) in about
one hour.
5) Remember the character
of your wine choice.
It’s good to keep your red
wines on the higher racks, and
white, rosé, sparkling wines
and champagne on the lower
racks.
6)
Storing your Wines
™ After 1-2 hours of
working, the inside
cabinet will be
properly cooled,
allowing you to
store your wines.
Please allow your Wine
Cooler this time to
cool before storing
your wines.