Baumatic BT82.1GL, User Manual

Page: 15 / 24

Fitting the Chimney Pipe
Note the tabs at the back of the hood. Take the two casings ‘A’ & ‘B’.
Rest the bottom of casing ‘A’ on the top of the hood.
Fix casing ‘A’ onto the hood,
using the screws ‘K’ that are
supplied in the bag of
accessories (see Figure at left).
1) Lift casing ‘B’ until it
reaches the ceiling, checking
that it is perpendicular to the
hood. Mark the side
measurement of casing ‘B’ and
then lower it.
2)
Take the fixing support
bracket ‘G’ , centre it with
respect to the mark you have
made for it, being sure to keep it
in contact with the ceiling.
3)
Mark the anchoring holes
H.
4)
Using a drill bit with a
diameter of 6 mm, make two
holes on the marks
you have made.
5) Insert rawlplugs into these
holes.
6)
Put bracket ‘G’ into
position and secure it with the
screws provided.
7)
Lift casing ‘B’ up to the
ceiling and secure it to the
bracket ‘G’ using the screws
provided in the holes ‘M’.
14
INSTALLATION INSTRUCTIONS
– Attaching the Hood