33
Electrical connection
This appliance must be installed by a qualified
person in accordance with the latest edition of the
I.E.E. Regulations and in compliance with Baumatic’s
instructions.
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o
This appliance must be wired into a 20 A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. It should
not be located above the appliance and no more than 1.25m
away from it.
o
The spur outlet must still be accessible even when your oven is
located in its operating position.
o
Cable type: H05 RRF 3 core x 2.5 mm²
o
To connect the oven power cord, loosen and remove the cover
on the terminal block, in order to gain access to the contacts
the earthing
(yellow/green) conductor must always be 10 mm longer than the
line conductors.
o
Care must be taken to ensure that the temperature of the mains
supply cable does not exceed 50°C.
inside. Make the connection, securing the cord in place with the
cable clamp provided and then immediately close the terminal
block cover again.
o
If you have to change the oven power cord,
Summary of Contents for BT2710SS
Page 1: ...1 BT2710SS 90cm Multi function twin cavity cooking theatre...
Page 38: ...38...
Page 39: ...39...
Page 40: ...40...
