Baumatic BT2431SS, User Manual, Page: 27 / 36

27
o
Reassemble all the burners carefully; in particular you should
make sure that the flame spreader is cor
laced on
b
Minimum
tme t for hob gas taps
us e carrie out by a CORGI registered
minimum
position.
place a small
bladed
screwdriver to
the outside of the
o
increase the gas flow
o
o
ust be tightly
o
m flow to minimum flow. If it does then remove
s
.
rectly p the
urner.
flow adjus n
All work m
t b d
engineer.
o
Switch the burner
on and set the
knob at the
o
Remove the knob
from the tap and
tap.
Unscrew the adjusting screw, in order to
or tighten the adjusting screw to decrease the gas flow.
The correct adjustment is obtained when the flame has a
length of about 3 – 4 mm.
For butane/propane gas, the adjusting screw m
screwed in.
Refit the control knob.
o
Make sure that the flame does not go out by quickly turning
from maximu
the control knob and make further adjustments to the ga
flow, testing it again once the adjustment has been made