3
SAFETY INSTRUCTIONS
Read this Instruction Manual carefully to obtain the
best performance from your oven. Keep this manual
so that it can be read by a new owner.
Electrical Safety
• To connect the oven to the power supply, the technician
should use an T150 power cable. The connection diagram
is shown in Figure 19.
• The oven should always have a good earth connection in
line with current regulations.
• Connection must be made by means of an omnipolar
switch that is suitable for the current drawn and with a
minimum aperture between contacts of 3 mm for
disconnection in case of emergency, cleaning or bulb
changing. Under no circumstances must the earth wire
pass through this switch.
• This switch may be replaced by a plug, provided it is
accessible for normal use.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• Any handling or repair to the appliance, including
replacement of the power cable, should be carried out by
authorised Technical Service Personnel using original
spare parts. Repairs or handling by others may damage
the appliance or cause malfunctioning that could be
hazardous to your safety.
• Unplug your oven if it malfunctions.
