17
1) Determine the correct height for the rangehood and fix the hook. Ensure
that the hook is level when fixed. Mark and fix the inner chimney bracket
as described in the section “Fitting the chimney”.
2) Fix the outer chimney bracket to the outer chimney ensuring that the inner
chimney is free to slide to the required height and the exhaust ducting
does not impede the movement. Then fit the exhaust ducting and the
chimney assembly to the rangehood and hang on the hook.
3) Feed the exhaust ducting to your desired position then adjust the height of
the inside chimney to the inner chimney bracket and screw in place. Once
the position is fixed, secure the unit with two safety screws through the
Ø6mm holes in the back casing.
