Baumatic BR221.5, User Manual, Page: 19 / 36

19
eplace the light cover and after waiting five minutes, reconnect
o
Change the present light bulb with a new one. The replacement
bulb should not have a greater rating than 15 W.
o
R
your plug to your mains supply.
Installation
IMPORTANT: Before installation and usage,
read all the instructions and make sure that the
voltage (V) and the frequency (Hz) indicated on
actly the same as the
e and frequency in your home. The rating
a
o
hich are n
OR FITTED
liance is connected by a
ember of the N.I.C.E.I.C.
d local regulations.
.
o
Live
o
must be connected to the terminal marked “N”
black.
the rating plate are ex
voltag
plate can be found on the front left edge of the
inside of the refrigerator.
The manuf
failing to
cturer declines all responsibility in the event of the installer
bserve all the accident prevention regulations in force,
ecessary for normal use and the regular operation of the w
electric system.
Electrical connection
YOUR FRIDGE FREEZER IS INTENDED F
AND PERMANENT INSTALLATION.
We recommend that the app
qualified electrician, who is a m
and who will comply with the I.E.E. an
o
Your refrigerator comes supplied with a 13 amp plug fitted. If in
future you need to change the fuse in this plug, then a 13 amp
ASTA approved (BS 1362) fuse must be used
The wiring in the mains lead is coloured as follows:
Brown
Blue Neutral
Green and yellow Earth
As the colours of the wires in the appliance’s mains lead may not
correspond with the coloured markings identifying the terminals
in your spur box, please proceed as follows:
The brown wire must be connected to the terminal marked “L”
(live), or coloured red.
The blue wire
(neutral), or coloured