background image

Installation 

IMPORTANT: Before installation and usage, 
read all the instructions and make sure tha
voltage (V) and the frequency (Hz) indicated on 
the rating plate are exactly the same as the 
voltage and frequency in your home. The rating 
plate can be found on the front left edge of the    

 

15

t the 

 

 

        inside of the refrigerator. 

 
The manufacturer declines all responsibility in the event of the installer 
failing to observe all the accident prevention regulations in force, 
which are necessary for normal use and the regular operation of the 
electric system. 
 

Electrical connection 

YOUR REFRIGERATOR IS INTENDED FOR FITTED 
AND PERMANENT INSTALLATION. 

We recommend that the appliance is connected by a 
qualified electrician, who is a member of the N.I.C.E.I.C. 
and who will comply with the I.E.E. and local regulations.

 

 

o

 

Your refrigerator comes supplied with a 13 amp plug fitted. If in 
future you need to change the fuse in this plug, then a 13 amp 
ASTA approved (BS 1362) fuse 

must

 be used. 

 

o

 

The wiring in the mains lead is coloured as follows: 

Brown 

   

Live 

Blue   

 

 

 

Neutral 

Green and yellow 

 

Earth 

 

o

 

As the colours of the wires in the appliance’s mains lead may not 
correspond with the coloured markings identifying the terminals 
in your spur box, please proceed as follows: 

 

The 

brown wire 

must be connected to the terminal marked “L” 

(live), or coloured 

red

 
The 

blue wire

 must be connected to the terminal marked “N” 

(neutral), or coloured 

black

 
The 

green and yellow wire

 must be connected to the terminal 

marked “E” (earth), or by the earth symbol, or coloured 

green 

and yellow

 

o

 

When the connection is completed, no stray strands or cut wire 
should be present. The cord clamp must be secured over the 
outer sheath. 

 
 

Get user manuals: 

See SafeManuals.com

 

 

Summary of Contents for BR200.3A





























Reviews: