background image

 

 

 

6

 
 

UPON DELIVERY:  

 

 

When your Fridge has been delivered, you will need to 
wait approximately 2 hours before turning it on.  The fluid 

of the compressor installed in the appliance will need 

time to settle.  PLEASE DO NOT PLUG IN ANY EARLIER 
THAN THIS! 

 
 

NOTE: 
 THERE CAN BE AN ODOUR WHEN 
YOU FIRST SWITCH ON THE 
APPLIANCE.  IT WILL VANISH 
WHEN THE UNIT STARTS 
COOLING. 

 

 

We recommend that you 

have the Fridge delivered 

near to where you plan to 

install it so that this fluid 

can settle.  

 

 
 
 
 

 

SITUATING YOUR FRIDGE 

 

 

CAUTION

:  DO NOT PLACE THE APPLIANCE NEAR HEAT SOURCES 

AND FOLLOW THE INSTALLATION ADVICE SHOWN ON PAGE 15. 

 

 
 

FOR FULL INSTALLATION ADVICE, PLEASE SEE PAGE 15   

 

MAKE A NOTE OF THE LOCATION FOR YOUR NEW FRIDGE.  MAKE SURE THAT 
IT WILL FIT PROPERLY SO THAT: 

 

1)

 

The doors can open freely and completely. 

2)

 

You can access your food conveniently. 

3)

 

There is sufficient space at the back for the cooling coils to 

give off heat safely & that they do not touch the plug (see SAFETY 
SECTION). 

 

 

NOTE:  You can reverse the swing of the door to customise the unit to 

your location. Please see page 18 for details. 

NOTE:  BEFORE Using your BR16.2A LARDER-FRIDGE: 

Summary of Contents for BR16.2A




























Reviews: