39
o
Fully open and close the oven door several times and check that
the flame is maintained. If the flame is maintained, then switch
the oven burner off.
o
Reconnect the oven to the electricity supply.
o
IMPORTANT: It is now necessary to carry out a full function
test of the appliance (this should include a gas tightness test).
Substituting the grill burner injector
IMPORTANT: Your appliance must be disconnected from the
electric and gas supply before completing this process.
o
Open the oven door completely. Remove the grill burner
attachment screws at the end of the burner.
o
Remove the burner by moving it towards the right and sliding it
off the support which props up the left side of the muffle, until
the injector is uncovered. In doing so, take care not to change
the position of the igniter and safety device which are attached
to the burner.
o
Unscrew the remove the injector and replace with the injector
which corresponds to the new gas type (see the table on page
36).