Baumatic BMM201SS, Instruction Manual, Page: 14 / 40

Using your microwave
Setting the clock
o
When your microwave is
connected to the power supply, it
is necessary to set the clock to
the correct time of day.
o
Press the clock button (B) until
the numbers on the LED display
(A) start to flash.
o
Use the adjustment dial (E) to set
the hour time.
o
Press the clock button to confirm
the hour time. The minute digits
will flash.
o
Use the adjustment dial to adjust
set the minute time.
o
Press the clock button to confirm the minute time.
o
IMPORTANT: Once the time of day is set, if you briefly press
the clock button, then the time will disappear from the LED
display. To restore the time of day to the LED display, press the
clock button briefly again.
Before first use
o
To remove any residue from the oven that may have been left
from the manufacturing process, you should place a cup that is
half filled with water in the microwave.
o
Set the microwave on its highest power level for 2 minutes.
o
The oven cavity and outside of the appliance should be cleaned
with warm soapy water, using either a sponge or soft cloth. No
abrasive cleaners should be used. The appliance should be
thoroughly dried afterwards.
14