Baumatic BMEH94E1G, Instructions For Use And Installation

Page: 13 / 32

13
SPECIAL WARNINGS AND FAULT REPORTING

During the warranty period, only a service center authorized by the manufacturer may carry out any repairs.

Before making any repairs, make sure the appliance is disconnected from the power mains either by removing the fuse or
by disconnecting the power plug from the wall outlet.

Unauthorized tampering with and repairs of the kitchen range (cooking hob) can result in electric shock or short circuit;
hence, do not attempt to perform any repairs by yourselves. Leave such tasks to an expert or an authorized service unit.

In case of minor faults or problems with the appliance operation, check the following instructions to see whether you can
eliminate the causes by yourselves.

Elimination of any errors or warranty claims that resulted from improper connection or use of the appliance is not covered
by our warranty. In such cases, the costs of repair are borne by the user.
Following is some advice on rectifying some common problems.
Problem Possible cause Elimination
The flame is uneven /
unstable Wrong gas power setting. Have an expert check he gas pipeline!
The flame from the burners
suddenly changes Wrongly assembled parts of the kitchen
hob Assemble the burner correctly.
Burner ignition takes more
time Wrongly assembled parts of the kitchen
hob Assemble the burner correctly.
The flame is extinguished
shortly after ignition Knob pressed too short or to weakly. Keep the knob depressed for a longer
period of time. Before releasing it, pres it
harder.
The grid has discolored in the
burner area This is a commonplace
phenomenon resulting from high
temperature Clean the grid with a metal care
detergent.
Electric power supply in
general is interrupted The lighter/terminal block may be blown Check the lighter/terminal block in the
fuse box and replace it if it is blown
Electric ignition of the burners
no longer works There are food or detergent residues
between the ignition candle and the
burner Open and carefully clean the opening
between the ignition candle and the
burner
If the burner cover looks
unappealing Regular dirt Clean the burner covers with a metal
care detergent.
If the problem persists despite observing the instructions above, call an authorized service technician.