Baumatic BMEC9GGESS, Instruction Manual

Page: 9 / 32

GAS CONNECTING GAS CONNECTING
HOSE
ATTACHMEN
T FOR LIQUID
GAS
HOSE
ATTACHMENT
FOR NATURAL
GAS
WARNING: connect the gas to the oven's gas supply line using
the supplied connector (A) (see figure 11)
F
GB
If the connecting tube must be passed behind the appliance,
observe the regulations of the picture 11D
The possible connections are:
WARNINGS
Concerning rubber flexible tubes, we remember you:
1 - to avoid the tube to be narrowed or crushed
2 - do not submit it to traction or torsion efforts
3 - to avoid contact with sharp edges, etc...
4 - to avoid contact with parts reaching temperatures over 70°C
the ambient temperature
5 - to ensure that they can be checked for all their length.
We recommend to check wether the appliance has been foreseen
for the kind of gas distributed.
The appliance must be connected to the gas piping in a workmanlike
way and in conformity with the regulations in force which lay down
the installation of a safety valve at the end of the piping.
For butane and propane a pressure reducer conforming to the
standards in force may perform this task. The seal gaskets must
be in accordance with rules.
Once the gas appliance has been connected, check the connection
seal by means of soapy water.
Warning: do not use flames to check any gas leakages.
1 ) by rigid pipe in iron or copper.
Fig. 11B
F
3 ) by the insertion of a rubber tube in accordance with rules.
This tube must be connected directly on the push-on connector,
concerning the gas used, and it must be blocked with a band.
In the last case, check the tube's printed date of expiry and
replace it before this date (see fig. 11B).
2 ) by flexible tube in stainless steel with continuing wall, with
mechanical connection in accordance with rules (see fig. 11).
Certain types of cookers can be set for sypply both on the right or
lefthand side. In this case it is sufficient to reverse the position of the
cad nipple reducer. At the end make sure than there is no leakage
of gas (fig 11C).
Inlet
Fig. 12A
Stop
Fig. 11C
Fig. 11D
Once the gas appliance has been connected, check the connection
seal by means of soapy water.
Warning: do not use flames to check any gas leakages.
9
Fig. 11
A