Baumatic BMC253SS, Instruction Manual, Page: 33 / 44

Built under installation requirements
IMPORTANT: NO OTHER METHODS OF BUILDING UNDER THE
MICROWAVE ARE SANCTIONED BY BAUMATIC.
o
The rear wall of the housing unit MUST be removed to allow
there to be the correct amount of ventilation.
o
The ventilation gaps below the support shelf and below the
worktop MUST be adhered to.
o
An induction hob MUST NOT be fitted above the microwave.
o
It is not necessary to have a storage drawer fitted underneath
the microwave; this is shown purely as an example in the
drawing above.
o
WARNING: The microwave will get hot during operation;
care should be taken not to accidentally come into contact
with the outer surface.
33