Baumatic BKW40 User Manual Download Page 9

The switch is in the "OFF" position.

The bulb has burned out(see maintenance section for 
the replacement procedure).

The wine cooler is unplugged.

The home circuit breaker or fuse has tripped.

The wine cooler does not have the correct clearances.

The door gasket does not seal properly.

The temperature control is not set correctly.

The door is not closed completely.

The door is opened too often.

A large amount of contents has been added to the wine
 cooler.

The room temperature is hotter than normal.

The wine cooler does not have the correct clearances.

The door gasket does not seal properly.

The door is not closed completely.

The door is opened too often.

External environment may require a higher setting.

Wine cooler is 
not cold enough.

The circuit breaker tripped or blown fuse.

Wine cooler does
 not operate.

PROBLEM

TROUBLESHOOTING GUIDE

You can solve many common wine cooler problems easily, saving you the 
cost of a possible service call. Try the suggestions below to see if you can 
solve the problem before calling  the servicer.

Troubleshooting

POSSIBLE CAUSE

Not plugged in.

Check to be sure the temperature control setting.

Compressor turns 
on and off frequently

The light does
 not work.

8

Summary of Contents for BKW40











Reviews: