background image

Safety cut-off 
 

o

 

If one or more of the cooking zones are accidentally left on, a 
safety cut off will activate after a certain period of time. The 
length of time depends on the power level that a zone or zones 
have been set on. 

 

LEVEL 

TIME LIMIT 

8 hours 40 seconds 

6 hours 42 seconds 

5 hours 18 minutes 

4 hours 20 minutes 

2 hours 50 minutes 

2 hours 19 minutes 

1 hour 53 minutes 

1 hour 30 minutes 

 

o

 

If the safety cut off has activated, the symbol “H” will appear in 
the cooking zone indicator 

(6)

 that applies to the cooking zone 

that has been left on. To reset the appliance, you should press 
the ON/OFF button 

(1)

 

o

 

If the plus 

(5) 

or minus 

(4)

 buttons are pressed, then the 

length of time before the safety cut-out will activate is reset. 

 
Automatic pre-heating 
 

 

o

 

This feature will set a cooking zone to maximum power and will 
then automatically set the cooking zone to a power level that 
you have selected after a certain period of time.

 

 

o

 

Use the minus button 

(4) 

to select power level 9, and then use 

the plus button 

(5)

 to select power level 9. An “A” symbol will 

appear in the cooking zone indicator 

(6)

 

o

 

Press the minus button 

(4) 

until the cooking zone indicator 

(6) 

shows the desired power level, then release the minus button. 

 

o

 

When the minus button 

(4)

 is released, the power level that you 

have selected will appear on the cooking zone indicator 

(6)

alternating with the symbol “A”. 

 

16

Summary of Contents for BIZ3SS

































Reviews: