background image

Electrical connection 

 

17

 

Cable type: H05 RRF 3 core x 4.0 mm² (Type RR-F <HAR> 

his product. 

pply voltage 

marked on the rating plate corresponds with your mains supply 

ply 

 

 follows: 

 

Neutral 

reen and yellow   

Earth 

 

o

 

 the appliance’s mains lead may not 

orrespond with the coloured markings identifying the terminals in 

 

n wire  must be connected to the terminal marked “L” 

ive), or coloured red

 

 
YOUR HOB IS INTENDED FOR FITTED AND PERMANENT 
INSTALLATION.  

 

o

marked). 

 

o

 

The mains cable is not supplied with t

 

o

 

Before connecting the appliance, make sure that the su

voltage.  

 

o

 

We recommend that the appliance is connected by a qualified 
electrician, who is a member of the N.I.C.E.I.C. and who will com
with the I.E.E. and local regulations. 

 

o

 

WARNING: THIS APPLIANCE MUST BE EARTHED. 

 

o

 

The hob must be wired into a 30A double pole switched fused spur 
outlet, having 3 mm contact separation and placed in an easily 
accessible position adjacent to the appliance. The spur outlet must
still be accessible even when your hob is located in its housing. 

 

o

 

The wiring in the mains lead is coloured as

Brown   

 

 

Live 

Blue 

 

 

 

G

As the colours of the wires in
c
your spur box, please proceed as follows: 

The  brow
(l

Summary of Contents for BHS600.5-BL

























Reviews: