Baumatic BHG900.6SS, Instruction Manual

Page: 6 / 20

CLEANING
IMPORTANT:
Always disconnect the appliance from the gas
and electricity mains before carrying out any
cleaning operation.
2)
GAS HOB
Periodically wash the ho
b
, the pan stands,
enamelled burner covers “C”, and burner heads
“T” (see fig. 6) must also be washed and the
ignition elements “AC” and safety cut-off sensors
“TC” (see fig. 6) must be cleaned. Do not wash
them in the dishwasher. Following this, all parts
should be thoroughly rinsed and dried. Never wash
them while they are still warm and never use
abrasive powders. Do not allow vinegar, coffee,
milk, salted water, lemon or tomato juice from
remaining in contact with the enamelled surfaces
for long periods of time.
WARNINGS:
Comply with the following instructions, before
remounting the parts:
- Check that burner head slots “T” (fig. 6) have
not become clogged by foreign bodies.
- Check that enamelled burner cap “C”(fig. 6)
are correctly positioned on the burner head.
It must be steady.
- The exact position of the pan support is
established by the rounded corners, which
should be set towards the side edge of the
gas hob .
- Do not force the taps if they are difficult
to
open
or close. Contact the technical
assistance service for repairs.
- Don’t use steam jets for the equipment
cleaning.
FIG. 6
5
Note: continuous use could cause the
burners to change colour due to the high
temperature.