background image

Positioning 
 

The adjacent furniture must be able to withstand a 
minimum temperature rise of 85°C above the ambient 
temperature of the room it is located in, during 
periods of use. 

 
*
 600 mm (BHG620SS / BHG690SS / BHG625SS / BHG695SS) 
700 mm (BHG720SS / BHG790SS) 
 

o

 

This appliance can be located in a kitchen, a kitchen diner or a bed 
sitting room. IMPORTANT: The appliance must not be installed in a 
bathroom or shower room.
 

 
This appliance is classified as Class 3 and therefore is to be built into a 
kitchen unit (depending on size) or 600mm worktop, providing the 
following minimum distances are allowed: 
 

o

 

The edges of the hob must be a minimum distance of 55 mm from 
a side or rear wall. 

 

o

 

700 mm between the highest point of the hob surface (including the 
burners) and the underside of any horizontal surface directly above 
it. 

 

o

 

400 mm between the hob surface, providing that the underside of 
the horizontal surface is in line with the outer edge of the hob. If 
the underside of the horizontal surface is lower than 400 mm, then 
it must be at least 50 mm away from the outer edges of the hob. 

 

17

Summary of Contents for BHG620SS

































Reviews: