21
BH754TCSS
BH755TCSS
o
Cut a hole in the worktop that corresponds with the relevant
drawing on the previous page.
o
IMPORTANT: You must have a gap of at least 25 mm between
the underneath of the appliance and any surface that is below it.
o
Carefully turn the hob upside down and place it on a cushioned
mat.
o
Apply the sealing strip (A) provided around the edge of the
appliance.
o
The protective covering must be removed from both sides.
o
Do not leave a gap in the sealing agent or overlap the thickness.
Summary of Contents for BH644TCSS
Page 32: ...32 ...
