Baumatic BGG30, Instruction Manual

Page: 19 / 32

19
ce is sufficient. HOWEVER sufficient
space must be allowed for saucepan handles to be turned and for
f
the underside of the horizontal surface is lower than 400 mm, then
it must be at least 50 mm away from the outer edges of the hob.
hen unpacking the appliance please check that the following items
n the packaging:
nual
warranty card
elf-adhesive label for amending the gas category on the appliance’s
ating plate (required if the LPG conversion jets are used).
Cut a hole in the worktop that corresponds with the relevant
drawing for your hob on the next page.
o
If the hob is positioned so that the right or left hand side of the
appliance will be near to the edge of a kitchen unit. There must be
a gap of at least 200 mm between the side of the hob and the
vertical surface of any kitchen unit that is made of a combustible
material. If the vertical surface is made of a non-combustible
material, then 50 mm clearan
saucepans to be used safely.
o
400 mm between the hob surface, providing that the underside of
the horizontal surface is in line with the outer edge of the hob. I
Unpacking the appliance
W
are contained withi
1 x Baumatic hob
Pan stands
Burner assemblies
Instruction ma
Baumatic
Fixing screws
Clamps
Sealing strip
LPG conversion jets
S
r
Installing the appliance
o