BAUMATIC
BFD47SS dishwasher user manual
22
ERROR CODES -
WHAT THEY MEAN
* YOUR DISHWASHER MAY EXPERIENCE A FAULT. SHOULD THIS HAPPEN, A
CODE CONSISTING OF ‘E’ & A NUMBER FROM 1-7 CAN BE DISPLAYED.
USE
O NDERSTAND WHAT IS RONG
THIS TABLE T U
W
.
*NOTE*
: ALWAYS CALL FOR A
Baumatic Ltd
ENDORSED / APPROVED
SERVICE TECHNICIAN TO CARRY OUT REPAIRS.
CODE
SYMPTOM:
CAUSE:
WHAT TO DO:
Ensure that inlet hose is not
‘Err1’
LONGER FILL TIME.
FAUCET IS NOT OPENED.
kinked or crushed.
THE DRAIN PIPE WAS PLACED
TOO HIGH WHEN IT WAS
INSTALLED.
Ensure drainage system is as
‘Err2’
per
manual and not
LONGER or EXTENDED DRAINING TIME
extended.
MALFUNCTION OF
TEMPERATURE SENSOR OR OF
HEATING ELEMENT.
LONGER HEATING TIME – NOT
REACHING REQUIRED TEMPERATURE
CALL FOR A QUALIFIED
‘Err3’
S
ERVICE TECHNICIAN.
TOO MUCH INLET WATER.
Overdosing. 3-in-1 put in
with salt and/or rinse aid in
*NOTE * - THERE ARE
NUMEROUS CAUSES OF AN ‘E4’
MESSAGE. REFER TO
APPLIANCE USAGE SECTION
‘Err4’
t
OVERFILLED
he appliance =overdose.
OF THIS MANUAL FOR
GUIDELINES ON HOW TO
PREVENT AN OVERFILL.
Could also be a Water
P
ressure problem.
‘Err6’
SHORT CIRCUIT OR SENSOR
BREAK OF TEMPERATURE
CALL FOR A QUALIFIED
ABNORMAL TEMPERATURE
S
‘Err7’
ERVICE TECHNICIAN.
WARNING!
IF OVERFLOW OCCURS, TURN OFF THE MAIN WATER SUPPLY BEFORE CALLING A SERVICE
TECHNICIAN. IF THERE IS WATER IN THE BASE OF THE TANK PAN BECAUSE OF AN OVERFILL
OR SMALL LEAK, THE WATER SHOULD BE REMOVED BEFORE RESTARTING THE DISHWASHER.
22
