background image

Installation notes            

 

 

Electrical connection 

Before connecting the appliance, make sure the supply voltage marked on the 
Rating Plate corresponds with the mains supply voltage. 
 

WARNING – THIS APPLIANCE MUST BE EARTHED 
 

This appliance is fitted with a moulded-on 13A plug top for connection to a socket 
outlet. If it is necessary to remove the plug, the cut off portion must be disposed of 
safely to prevent a shock hazard if inserted into a socket outlet. 
 
To fit another plug top, or wire the appliance into a double pole switched fused spur  
outlet having 3 mm contact separation, follow the instructions below. 

 
IMPORTANT

         

 
The wires in the mains supply lead are coloured in accordance with the following 
code:- 
The wire coloured Green and Yellow must be connected to the terminal marked ‘E’ 
or the earth symbol ( 

 ) or coloured green or yellow.                                                          

The wire coloured Blue must be connected to the terminal marked ‘N’ or coloured 
blue or black. 
The wire coloured Brown must be connected to the terminal marked ‘L’ or coloured 
brown or red. 
 

NOTE:

 If connecting to a fused spur, the terminals marked ‘SUPPLY’ are for the 

mains supply wires and the terminals marked ‘LOAD’ are for the appliance wires. 
The electrical outlet should be position in an easily accessible position adjacent to the 
appliance. 
In the event it is necessary to replace the mains lead, the replacement must conform to 
the specification listed in the Technical Data ensuring the correct colour code 
connection and all screws are tightened sufficiently. 
 

Cleaning and maintenance 
 
Before cleaning or carrying out any maintenance, disconnect the appliance from 
the mains supply.  

Do not use caustic or abrasive agents as these can damage the surface finish. 
Clean the exterior with a soft cloth dampened with detergent and the removable 
accessories with warm detergent but do not place in a washing machine. 
Wipe the interior of the appliance with a soft cloth dampened with a solution of warm 
water and one or two spoonfuls of vinegar. 
Clean the condenser at the rear of the appliance with a soft brush or vacuum cleaner 
and wipe over the drain pan fitted to the compressor. 
 
 
 

Summary of Contents for BF290BL














Reviews: