Installing the appliance
o
Cut a hole in the worktop that corresponds with the drawings
shown above.
o
IMPORTANT:
You must have a gap of at least 25 mm between
the underneath of the appliance and any surface that is below it.
o
Carefully turn the hob upside down and place it on a cushioned
mat.
o
Apply the sealing strip provided around the edge of the
appliance.
o
The protective covering must be removed from both sides.
o
Do not leave a gap in the sealing agent or overlap the thickness.
20
Summary of Contents for BF17
Page 1: ...1 BF17 70 cm Front touch control ceramic hob...
Page 28: ...28...
