Baumatic BEC2.1SS, Instruction Manual

Page: 11 / 36

Using your coffee machine
Before first use
o
Install the appliance as per the installation instructions contained
within this booklet.
Filling the reservoir (manually)
IMPORTANT: If your coffee machine is not connected to
your mains water supply, then you will need to fill the water
reservoir manually before using your appliance.
o
Push the water reservoir door (3) on the right hand side to open
it.
o
Remove the water reservoir (2) from the cabinet.
o
Fill the water reservoir with cold water from a tap; you should fill
it with water until it is two thirds full.
o
Connect the water softener (20) to the tube that hangs down
inside the water reservoir compartment. IMPORTANT: You must
connect the water softener to the left hand tube.
o
Put the water reservoir back into the cabinet and immerse the
water softener in water, the other tube must also be placed
inside the reservoir.
o
IMPORTANT: Leave the water filter immersed in water for 5
minutes, before switching on the appliance and attempting to
make a drink. You only need to do this before using the machine
for the first time or if you have changed the water filter.
11