Baumatic BE2.1SS, Instruction Manual

Page: 7 / 24

7
leaning
Cleaning of the hob should be carried out on a regular basis.
should be disconnected from the mains and allowed to cool.
using this appliance and when
following the cleaning procedure.
high pressure
cleaning equipment to clean the appliance.
ection of this booklet that refers to
stallation.
esult of improper
use or installation of this appliance.
eclaration of conformity
This appliance complies with the following European Directives:
MC Directive inclusive of
9/109/EEC dated 25/01/1992 Materials that can touch food.
ertified
must be used by a trained person for domestic purposes only.
o avoid damaging your appliance
The hob surface can be damaged by objects falling onto it.
the hob surface can be damaged by knocks from
cookware.
s
may scratch the hob surface if they are dragged across it.
C
o
o
IMPORTANT: Before attempting to clean the appliance, it
o
Great care should be taken whilst
o
You should not use a steam jet or any other
Installation
This appliance must be correctly installed by a
suitably qualified person, strictly in accordance
with the manufacturer’s instructions. Please see
the specific s
in
o
Baumatic Ltd. declines any responsibility for injury or
damage, to person or property, as a r
D
-73/23/EEC dated 19/02/1973 Low Voltage Directive.
-89/336/EEC dated 03/05/1989 E
Amending Directive 92/31/EEC.
-93/68/EEC dated 22/07/1993 CE Marking Directive.
-8
o
The manufacturer declares that the hob is built using c
materials and requires the appliance to be installed in
accordance with the standards currently in force. This appliance
T
o
o
The edge of
o
Cast iron and cast aluminium cookware with damaged base