Baumatic BDWS45SS, Instruction Manual

Page: 11 / 48

Using your dishwasher
Before first use
o
Install the appliance as per the installation instructions contained
within this booklet.
o
Add 1.5Kg specialist dishwasher salt to the dishwasher water
softener compartment and then fill with tap water. After this you
should set the water softener level.
o
Fill the rinse aid dispenser and then set the rinse aid dosage.
Filling with dishwasher salt
IMPORTANT: You should only use salt that is specially
designed for use in a dishwasher. If any other type of salt is
used in the appliance (in particular table salt), it will damage
the water softener.
o
Ideally you should fill the water softener with salt, just before you
are about to run a wash program. This will help to clear any salt
that may have overflowed from the water softener during the salt
filling process.
o
Open the door of the dishwasher and
then remove the lower basket. The
basket should be empty when you
remove it.
o
Turn the water softener cap
anticlockwise and remove it.
o
Pour salt into the water softener
compartment using the funnel that is
supplied with the appliance. You should
add approximately 1.5 kg of salt into the
water softener.
o
Then pour tap water into the water
softener until it fills.
o
It is perfectly normal for a small amount
of water to come out of the water
softener compartment.
11