Baumatic BDWI660, Instruction Manual

Page: 44 / 52

44
Securing the dishwasher
The dishwasher must be secured to the worktop, this can be done in
one of two ways:-
o
Standard worktop - Secure the dishwasher to the
underside of the worktop by using two wood screws (A) .
o
You should screw through the holes in the brackets at the
top of the dishwasher cabinet.
o
These screws should be fully tightened.
o
Marble/granite worktop - The material of the worktop
will mean that it is impossible to put a screw through the
underneath of the worktop.
o
On either side of the front edge of the dishwasher cabinet,
there is a rubber stopper. You should remove the rubber
stoppers, to reveal a pre-drilled hole on either side of the
dishwasher.
o
Secure the dishwasher to the cupboard either side of it, by
screwing a wood screw through the pre-drilled holes into
the cupboards.
These screws should be fully tightened (B) .
o
The rubber stoppers should then be refitted into their
original position.