Baumatic BDW3SS Manual Download Page 10

31

With the basket 

at its highest level

 you will be able to put plates

with a diameter of up to 19 cm. in the upper basket and up to
31 cm. in the lower basket.

With the basket 

at its lowest level

 you will be able to put plates

with a diameter of up to 24 cm. in the upper basket and up to
26 cm. in the lower basket.

CORRECT LOADING OF THE DISHES

Because you should never play with your food.

To ensure good results,

 it is very

important to load the dishes properly
in my racks.  Each dish should be
individually located in either basket
with sufficient clearance between
each item for water to pass, this will
guarantee a perfect wash and save
you time and money.

2. Top range basket.

Without having to take the top basket out
of its rails, you can adjust the height of the
basket with a simple hand movement, even
when there is crockery in the basket.

oth to raise and lower the position, pull u
pwards from the centre of the basket.

Regulating the height of the basket.

Depending upon your dishwasher model, you will be able to adjust the height of the
upper basket so as to enable you to wash bigger plates. But how? It's easy!

 1

Turn the wheel stop. 

(A)

 2

Pull the basket towards you and it 
will come out.

3

Put the basket back at the height you
have chosen.

 4

Turn the wheel-stop back to its 
original position. 

(B)

1.Standard basket.

B

A

Regulating the upper basket means you can get
the height you want.

Summary of Contents for BDW3SS






























Reviews: