Baumatic BDW17, Instruction Manual

Page: 11 / 44

Using your dishwasher
Before first use
o
Install the appliance as per the installation instructions contained
within this booklet.
o
Fill the water softener with 1 litre of tap water and then fill with
specialist dishwasher salt. After this you should set the water
softener level.
o
Fill the rinse aid dispenser and then set the rinse aid dosage.
Filling with dishwasher salt
IMPORTANT: You should only use salt that is specially
designed for use in a dishwasher. If any other type of salt is
used in the appliance (in particular table salt), it will damage
the water softener.
o
Ideally you should fill the water softener with salt, just before
you are about to run a wash program. This will help to clear any
salt that may have overflowed from the water softener during
the salt filling process.
o
Open the door of the dishwasher and then remove the lower
basket. The basket should be empty when you remove it.
o
Turn the salt container cap
anticlockwise and remove it.
o
Pour 1 litre of water into the water
softener container.
IMPORTANT: It is only necessary to do this when you fill
the container with salt for the first time.
o
Pour salt into the salt container, using
the funnel that is supplied with the
appliance. You should add
approximately 1.2 kg of salt into the
container.