background image

o

 

The 

 neon indicates that you need to add dishwasher salt to 

the appliance. You should follow the procedure outlined on page 
11. 

 

Cleaning and maintenance 

 
IMPORTANT: The appliance should be disconnected 
from your mains supply before commencing any 
cleaning process. 

 
The filter system 
 
Your appliance is fitted with three levels of filtering; these are located 
in the base of the dishwasher for ease of access. 
 

 
1)   Main filter 
 
2)   Coarse filter 
 
3)   Fine filter 

 
 

 

Main filter- 

Food and soil particles are trapped by this filter and 
pulverised by a special jet on the lower spray arm. 
This debris is then washed down the drain. 

 
Coarse filter- 

Larger items such as pieces of bone or glass, which 
could clog the drain, are trapped in this filter. 

  
Fine filter- 

This filter holds soil and food residue in the sump 
area and prevents it from being redeposited on the 
dishes during a wash cycle. 

 
IMPORTANT: Whilst the filtering system is efficient, your 
dishwasher is not a waste disposal unit. All items being 
washed inside of the dishwasher should have food scraps 
removed from them before being loaded into the appliance. 

 
 

 
 
 
 
 
 
 

 

24

Summary of Contents for BDW15













































Reviews: