Baumatic BDI652, Instruction Manual

Page: 28 / 44

28
T A FAULT HAS BEEN
General tro
E
CAUSES
WHAT TO DO
IF AN ENGINEER ATTENDS DURING THE GUARANTEE
PERIOD AND FINDS THA
CAUSED BY AN ITEM ON THE ERROR CODE LIST,
WHICH COULD HAVE BEEN CLEARED BY THE
CUSTOMER. THEN YOU MAY BE LIABLE FOR THE
COST OF THE SERVICE CALL.
ubleshooting
PROBLEM POSSIBL
Dishwasher Replace the e circuit
breaker. Remove any o
ed
ed into the wall socket.
fuse or reset th
ther
appliances that are sharing the same
circuit with the dishwasher.
Make sure that the dishwasher is
rned on and that the door is clos tu
securely.
Make sure that the power cord is
lly plugg fu
Check that the water supply is
nnected properly and that the co
water is turned on.
doesn’t
Fus he
circu has
Power su not
switch d on
Water pressure is low
run
e blown or t
it breaker
tripped
pply is
e
Drain pump
doesn’t stop an Overflow The system is designed to detect
overflow. If it does, then it will run
the drain pump continuously when
there is power to the appliance.
Noise Some audible sounds
are normal
Utensils are not
secure in t e baskets
o l
tablet
s loading instructions.
the dishwasher is not going to be
sed for a period of time, then you
h
r something smal
has dropped into the
basket
Motor hums
You will get a level of operating
noise during a wash cycle, in
particular when food is being
removed from items and when the
detergent dispenser places the
into the tub.
Ensure that everything is loaded as
er Baumatic’ p
If
u
should make sure that the appliance
is set on a wash program once a
week. Otherwise the seal around
motor may dry out and cause noise.
Suds in the
tub Improper detergent
use
Spilled rinse aid
id and salt.
Always wipe up any excess rinse aid
or rinse aid spillages immediately.
Ensure that you are not using 3 in 1
etergent tablets, in conjunction d
with rinse a