Cleaning the filters
For best performance and results, the entire filter assembly should be
thoroughly cleaned regularly (ideally after each wash cycle).
1.
Turn the coarse filter
anti-clockwise and
then lift it upwards.
Rinse out this section
under a tap to
remove any food
debris that remains
in it.
2.
Pull out the main
filter and rinse this
under the tap to
remove any food
debris that is trapped
in it.
3.
Pull out the fine filter
and rinse this under
the tap to remove
any food debris that
is trapped in it.
4.
Place the fine filter back in its original position.
5.
Place the main and coarse filter back into their original positions
in the base of the dishwasher. You must turn the coarse filter
clockwise to lock it back into position.
IMPORTANT: If a glass gets smashed inside of the appliance,
you must check there is no glass in the filter before the
machine is used again as this can cause a drainage failure.
IMPORTANT: THE DISHWASHER SHOULD NEVER BE
SET ON A WASH CYCLE WITHOUT THE FILTERS BEING
INSIDE OF THE APPLIANCE.
29
Summary of Contents for BDF465-SL/W
