Baumatic BCG600SS Instruction Manual Download Page 13

 

13

 oven timer 

Setting and using the

 

Setting the time of day 
 

Before using the oven for the first time you should set the time 
of day. 

 

 

o

 

Press the plus 

(3)

 and minus 

(2)

 buttons simultaneously to 

nd minus 

(2)

 buttons to adjust the time to the 

You can set a 

Set 

isplay has got to your desired countdown time, let go 

 

has 

been silenced. If you have finished cooking, then you should turn 

on selector and thermostat control knob to 0. 

 

enter the time-setting mode. The display will automatically show 
“12.00”.

 

 

o

 

Use the plus 

(3)

 a

correct hour. Release all buttons and after a few seconds the 
time will be set. 

 

 
Setting the minute minder function  
 

You are able to set the minute minder at any time, regardless 
of whether an oven function has been selected. 
period of time using the minute minder function and an alarm 
will sound when this period of time has elapsed. 

 

 

Press the plus button 

(3) 

to enter the alarm setting mode. 

o

the period of time that you wish the minute minder to 
countdown for by using the minus 

(2) 

and plus 

(3)

 buttons. 

 

o

 

Once the d
of the minus and plus buttons. After five seconds the countdown 
will begin. 

o

 

An alarm will sound when the countdown time has elapsed. The 
alarm can be silenced by pressing the minus button 

(2)

 

o

 

Important: The oven will continue to heat once the alarm 

the oven functi

 

Using the oven

 

 

, you should select either the 

Before first use 
 

o

 

To remove any residue from the oven that may have been left 
from the manufacturing process
main or grill oven function and turn the thermostat dial to its 
maximum temperature setting.  

 

o

 

It is perfectly normal for a smell to be produced during this 
process.

 

 

Summary of Contents for BCG600SS









































Reviews: